
Dealer guide
Every line on a proforma invoice needs an HS code, and more and more customs brokers ask for one code per spare part, not one code for the whole shipment. The code decides the duty you pay, and a wrong one can hold a container at the port. This guide lists the codes that apply to warehouse trucks and their spare parts, based on the documents we prepare for our dealers' shipments.
Before you start. The first six digits of an HS code are the same in every country. Each country then adds its own digits: the EU uses eight (the CN code), Brazil and the rest of Mercosur use eight (the NCM), the United States uses ten, and China uses ten for export. The final classification is decided by the customs of the importing country, so always confirm the full national code with your customs broker. In the EU, a Binding Tariff Information (BTI) ruling gives you legal certainty for products you import regularly.
Complete trucks
| Equipment | HS code (6 digits) | Why |
|---|---|---|
| Electric pallet trucks: pedestrian, stand-on and rider | 8427.10 | Self-propelled, electric motor, with lifting equipment |
| Electric stackers, reach trucks and order pickers | 8427.10 | Same heading |
| Electric counterbalanced forklifts | 8427.10 | Same heading |
| Self-propelled electric scissor lifts | 8427.10 | Confirmed by a World Customs Organization opinion in 2021; often declared under 8428.90 before that |
| Diesel and LPG forklifts | 8427.20 | Self-propelled, not electric |
| Hand pallet trucks and manual stackers | 8427.90 | Not self-propelled |
| Semi-electric stackers, pushed by hand with electric lift | 8427.90 | Not self-propelled |
| Electric tow tractors | 8709.11 | Works trucks without lifting equipment |
| Floor scrubbers and sweepers | usually 8479.89 | Machines with individual functions |
In the EU, 8427.10 is split by lifting height. Trucks that lift 1 m or more (stackers, reach trucks, forklifts and scissor lifts) go under 8427 10 10. Trucks that lift less, such as electric pallet trucks with a lift of about 200 mm, go under 8427 10 90. On our Chinese export declarations, electric trucks are declared as 8427.1090.00.
The battery and the charger supplied with a truck travel under the truck's code. They are classified on their own only when they are shipped as spare parts. For hand pallet trucks going to the EU, the code also decides whether anti-dumping duty applies: see our article on the EU anti-dumping duty on Chinese hand pallet trucks.

Spare parts: the rule that matters
Spare parts are where most mistakes happen. The notes to Section XVI of the HS give a simple rule, in two steps.
- If the part is a product with a heading of its own, such as a motor, a battery, a bearing or a switch, it goes under that heading, even though it was made for a pallet truck.
- Only parts with no heading of their own, made solely or mainly for the trucks of heading 8427, go under 8431.20: forks, frame parts, covers, wheels, brackets and tiller arms.
So a parts order for pallet trucks and stackers almost never has a single code. A typical order of seventy lines uses fifteen to twenty different headings.

Common spare parts and their codes
| Part | HS code (6 digits) |
|---|---|
| Forks, frame parts, covers, brackets, tiller arm | 8431.20 |
| Load wheels, drive wheels, castors | 8431.20 |
| DC motor, drive or lift, up to 750 W | 8501.31 |
| DC motor, over 750 W up to 75 kW | 8501.32 |
| AC three-phase motor | 8501.51 (up to 750 W), 8501.52 (over 750 W up to 75 kW) |
| Lithium-ion battery | 8507.60 |
| Lead-acid traction battery | 8507.20 |
| Battery charger | 8504.40 |
| Motor controller | 8504.40 or 8537.10: practice differs, agree it with your broker |
| Contactor, up to 60 V | 8536.41 |
| Switches, push buttons, microswitches, key switches | 8536.50 |
| Wiring harness with connectors | 8544.42 |
| Electromagnetic brake | 8505.20 |
| Ball bearings | 8482.10 |
| Bushings (plain bearings) | 8483.30 |
| Gearbox, complete | 8483.40 |
| Gears supplied separately | 8483.90 |
| Lift chains | 7315.11 (roller chain), 7315.12 (leaf chain) |
| Hydraulic lift cylinder | 8412.21 |
| Gear pump | 8413.60 |
| Hydraulic solenoid valve | 8481.20 |
| Oil seals and O-rings of rubber | 4016.93 |
| Seal kits of mixed materials | 8484.90 |
| Circlips and retaining rings | 7318.29 |

On the proforma invoice
- One line per part, with the part number, the description, the HS code, the quantity, the unit price and the total.
- A separate proforma for spare parts when the importer asks for one. In Brazil this is common; see importing electric pallet trucks into Brazil.
- The same wording everywhere. The description and the code should match on the proforma, the commercial invoice, the packing list and the customs declaration.
- Spare lithium batteries are dangerous goods and need their own shipping documents. Our article on shipping lithium electric pallet trucks explains why.
We put an HS code on every line of our proformas, for trucks and for parts. If your broker classifies a part differently, tell us before the goods are shipped and we will change our documents to match, so the invoice, the packing list and your customs declaration all agree.
For containers, lead times and documents in general, read importing warehouse equipment from China, and for the parts worth ordering with your first trucks, see spare parts for a new dealer. This guide is general information, not legal advice. When you are ready to order, contact us for a quotation with the codes already on it.
