HS Codes for Floor Scrubbers and Sweepers | Accelift
Distribution opportunities open in selected markets Become an Accelift distributor →

HS Codes for Floor Scrubbers, Sweepers and Their Spare Parts

Dealer guide

Cleaning machines often travel in the same container as pallet trucks and stackers, but they do not share their HS code. This guide lists the codes we use for floor scrubbers, sweepers and their wear parts, and the points where customs practice differs from country to country.

Before you start. The first six digits of an HS code are the same worldwide. Each country then adds its own digits, and the customs of the importing country has the last word. Always confirm the full national code, and the duty that goes with it, with your customs broker. The official tariff databases, such as TARIC in the EU, show the current rate for each code.

Complete machines

MachineHS code (6 digits)Why
Walk-behind and ride-on floor scrubbers8479.89Machines with an individual function, not named elsewhere
Walk-behind and ride-on floor sweepers8479.89Same heading; this is the code we use most often
Sweepers declared as road sweepers8479.10Some customs offices put outdoor sweepers with machinery for public works
Sweeper built on a road-going truck chassis8705.90Special-purpose motor vehicle; not part of our range

A floor scrubber is not a vacuum cleaner in customs terms, although it has a suction motor: scrubbing is its main function, so it stays in 8479 and not in 8508. Household floor polishers have a heading of their own, 8509, which does not apply to industrial machines.

For sweepers, ask your broker which of the two codes the local customs office expects. The description on the invoice should match it: “ride-on floor sweeper, battery powered” for 8479.89.

HS codes for floor scrubbers, sweepers, brushes, squeegee blades, batteries and chargers
The codes that appear on most cleaning-machine invoices.

Wear parts and spare parts

The rule is the same as for truck parts. A part that has a heading of its own goes under that heading. Only parts made for the machine, with no heading of their own, go under 8479.90.

PartHS code (6 digits)
Disc brushes, main brushes and side brushes9603.50
Squeegee blades and rubber skirts4016.99
Scrubbing pads of nonwoven abrasive6805.30
Dust filter of a sweeper8421.39 complete; 8421.99 for a replacement element
Suction (vacuum) motor8414.59
Brush motor and drive motor, DC, up to 750 W8501.31
Lithium-ion battery8507.60
Lead-acid battery8507.20
Battery charger8504.40
Suction hose of plastic3917.39
Solenoid water valve8481.80
Tanks, covers, brush decks, squeegee frames8479.90

Some of these lines are classified differently from one customs office to another, the suction motor and the filter element above all. If your broker uses another code, tell us before shipment and we will change our documents to match.

AcceClean JCF1250 compact ride-on sweeper with main brush and two side brushes
A ride-on sweeper carries three brushes and a filter: four invoice lines when they are ordered as spares.

On the invoice

  • The battery fitted to a machine travels under the machine's code. It gets its own code only when it is shipped as a spare.
  • Lithium batteries are class 9 dangerous goods, in the machine or as spares, and need their own shipping documents.
  • One line per part, with part number, description, HS code, quantity and price.
  • The same wording on the proforma, the commercial invoice, the packing list and the customs declaration.

The codes for pallet trucks, stackers and their parts are in HS codes for pallet trucks, stackers and their spare parts. This guide is general information, not legal advice. When you are ready to order, contact us for a quotation with the codes already on it.

Mixed containers welcome

Planning a container for your market?

Send us the models you need. We will work out the mix, the loading plan and the price.